How to cost effectively paint your car

Everyone usually has their own ideas when it comes to the look of their car. Some prefer bright colors, while others tend to go for more discreet tones. However, regardless of your personal preferences, it is still important that you understand a few things before you start to paint your vehicle. This is the only way you will ensure that things come out right and within your budget, along with maybe using a car finance calculator Australia, so that you don’t have to go out of pocket beyond maintaining your car loan.

Step 1
You should start by finding an ideal place that has excellent ventilation, as little dust as possible, sufficient lighting, electrical power, and enough room to work around the vehicle. Once you find such an area, you can proceed with gathering the necessary equipment and materials needed for the task, some of which include:

Paint and painting equipment
Polishing and sanding supplies
Safety gadgets

Once you have the necessary tools in hand, remove any plastic or chrome that can be easily taken off and replaced later. In case you find any item that will not smoothly come off, don’t force it. You can visit your local hardware store and get the right tools for extracting it.

You should then sand the paint to either the original primer or bare metal. Just make sure that it is sufficient so that the new paint sticks.

Step 2
The next thing will be to clean all the surfaces thoroughly using denatured alcohol or mineral spirits to ensure that no oils (including those from a person’s hands and fingers) are on the vehicle.

Afterwards, take some paper and masking tape to cover all the areas that you do not wish to paint such as the window trim, glass, mirrors, door handles, or grills. Also, ensure there aren’t any holes or gaps in the paper and masking tape that will allow overspray to pass through. Covering up your workspace or garage is also recommended in order to avoid permanent coloring on the walls and floors.

When it comes to painting, prime the surface with some self-etching, corrosion primer after you have removed all the paint down to the car’s bare metal. Also, make sure to apply enough paint to fill in pits or scratches left after the preparation process.

car tuning

Step 3
You should then let the primer cure sufficiently, but remember to check the information provided on the container. This is because primer curing times often differ, and there are those that may require re-coating after a certain amount of time since the initial application.

Go on to sand all the primed surfaces using a 600-grift wet/dry paper to smoothen out any paint or drips on the surface. Make sure that you are careful so as not to sand too much that you end up exposing the metal again.

Using a 12000-grit or much finer grit-wet sandpaper, finish sanding off the car and coat of paint to the point that it perfectly smooth. Rinse off any sanding residue present on the surface then allow it to dry.

Once it dries, use a rubbing agent to polish the paint and bring out the gloss.

As one can see from the information provided above, it is indeed possible for people to paint their vehicles within a practical budget. The main tasks usually involve determining which particular tone will go with your car and getting the right tools to accomplish the job. Once you have these down, you will be good to go.